For Busch-priOn(R) 1gang support frame 6346/10-10x and control elements 6122/0x-xxx, 6124/0x-xxx, 6125/0x-xxx, 6126/0x-xxx, 6127/0x-xxx, 6128/0x-xxx, 6129/0x-xxx. The bus can be connected via enclosed terminal block.
For Busch-priOn(R) support frame, 1gang, 2gang, and 3gang. Additional power supply must be connected via enclosed terminal block, e.g. yellow/white wires in bus connection. KNX connection exclusively for bus communication. The bus can be connected via enc
This device routes telegrams as a line or area coupler using the LAN for the rapid exchange of telegrams between the lines/areas.The device uses the KNXnet/IP protocol (Tunneling and Routing). For operation an additional 10…30V DC supply is necessary.
The IP Interface can program EIB/KNX devices via the LAN using the ETS 3.0d (or higher). The device uses the EIBnet/IP protocol (Tunneling) and can serve as an interface for a visualisation. For operation an additional 10 to 30V DC supply is necessary.
IP Switch Master for DIN rail mounting. To connect up to 5 terminal devices. Can be extended to 10 terminal devices through lateral coupling with the IP Switch Slave (ISS/S).One port is a Gigabit-Ethernet port and can be used as uplink port.
IP Switch Slave for DIN rail mounting. To connect up to 5 terminal devices. Can be extended to 10 terminal devices through lateral coupling with the IP Switch Master (ISM/S). The slave is inoperative without the master.
For ABB i-bus (R) KNX bus coupler 6120/12-101, 6120/13, 6197/12, 6197/13, 6197/14, 6197/15. Commissioning via USB connection and SD card slot. Data on SD card can be selected using the 4 push buttons using 4 push buttons shown on the 3-line backlit displa
Used to couple two sections of an ABB i-bus® line using an optical fibre link in order to bridge longer distances or to avoid having to implement lightning and overvoltage protection when laying cables between buildings.